We route epoxy flooring requests in the Denver area to local crews. Ask for itemised written quotes so preparation method, film thickness and warranty can be compared side by side.
Water and refill in Aurora
Aurora Water is a separate municipal utility serving Aurora and its contracts, drawing on both mountain surface water and groundwater, so its hardness and mineral profile are not Denver Water's.
Utility accounts: Aurora Water · 303.739.7000
Utility: Aurora Water — 303.739.7000
Soil, drainage and the shell
Denver series soils are slow to drain: fine, smectitic clays formed from calcareous sedimentary rock, with saturated hydraulic conductivity low enough that water reaching a slab stays in the profile. Smectite means the clay swells when wet and shrinks when dry, so slabs on it move with the seasons.
The local pool stock
Aurora runs east of Denver across I-225 into Arapahoe, Adams and Douglas counties. Much of the housing stock is 1970s to 2000s, poured over Denver-series clay and Pierre-Shale-derived ground, with grading that puts many driveway aprons on fill.
What to check in this town
- {'h2': 'Who permits epoxy flooring work in Aurora', 'html': '
The City of Aurora issues its own building permits through the Aurora Building Division. An Aurora address is Aurora, not Denver, even where the two cities touch.
Permit pages: www.auroragov.org.
'} - {'h2': 'River-corridor moisture under a Aurora slab', 'html': 'Denver series soils are slow to drain: fine, smectitic clays formed from calcareous sedimentary rock, with saturated hydraulic conductivity low enough that water reaching a slab stays in the profile. The published thresholds a standard Westcoat system is specified against are below 5 lbs/1000 sq ft on ASTM F1869 or 75% RH on ASTM F2170, with ICRI CSP 3-4 profile for the coating to bite into. Those are the numbers a provider should be putting on paper, and a moisture vapour barrier product such as EC-15 exists precisely for slabs that fail them. We match requests to local providers - we do not install or guarantee the work.'}
- {'h2': 'De-icer season on a Aurora garage floor', 'html': '
NWS Denver/Boulder climate figures for the valley: mean highs about 45 °F in January to about 90 °F in July, mean lows about 25 °F to about 56 °F, a record 108 °F on 16 July 2023 and a record −16 °F on 7 Feb 1989 (weather.gov NWS Denver/Boulder climate). Winter in Aurora means road salt and ice-melt compounds carried into garages on tyres and boots for several months, then a low-humidity summer with hard UV. Ask any provider what the topcoat is specified for in both directions, because a coating chosen only for a mild climate is the one that whitens under hot tyres.
'}
Jobs we can route here
- Garage Epoxy Flooring
- Basement Epoxy Flooring
- Commercial Epoxy Flooring
- Metallic Epoxy Flooring
- Polyaspartic Coatings
- Concrete Coating & Sealing
Costs in Aurora
| Job | Published range |
|---|---|
| Flake system, per sq ft | $4 - $9 |
| Polyaspartic, per sq ft | $6 - $9 |
| Two-car garage, installed | $1,800 - $5,500 |
| Professional install, full range | $4.00 - $15.00 per sq ft |
| Retail DIY kit | $60 - $160 |
Epoxy Flooring services in Aurora
Garage Epoxy
Garage Epoxy Flooring in Aurora, CO - local costs and what the job includes.
Basement Epoxy
Basement Epoxy Flooring in Aurora, CO - local costs and what the job includes.
Commercial Epoxy
Commercial Epoxy Flooring in Aurora, CO - local costs and what the job includes.